Your Best Rod Pump Manufacturer

Rod Pump

Material: SS, alloy steel, brass
Surface treatment: chrome-plating
Length and diameter: Customized
Annual output: 15000 sets per year
Package: Wooden case
Certification: international certificate
MOQ: 1set
Delivery: 45 days

Sanjack: Your Premier Choice Of Rod Pump

Sanjack has 40 years’ experience in designing and manufacturing Rod Pump,participating in the draw up of the national standard of downhole pump. . The annual production reaches 15,000 sets. The products have been provided in the U.S.A, Canada, Venezuela, India Kazakhstan and etc.

Sanjack: Your Best China Rod Pump Manufacturer and Supplier

Raw materials of rod pump produced from Sanjack shall be inspected after heat treatment, and the mechanical properties, chemical composition and metallographic structure must be inspected in batches. During processing, API 11ax rod pump parts shall be inspected many times. Key points such as plunger outer diameter and pump barrel inner diameter must be comprehensively inspected..

Sanjack: Your Best Place To Sucker Rod Pump In China

For sucker rod pump production, Sanjack has advanced production equipment for machining, spraying welding, electroplating, and honing. After the assembly of the entire sucker rod pump, 100% of the sealing performance test must be carried out.

Sanjack: The Advantages With Us You Should Know

1.Rod Pump is installed at the end of sucker rod string as a complete device.
2.Rod Pump can run deeper than the tubing pump.
3.Most types can use special service applications.
4.The use cost is lower than that of tubing pump.

The first letter R standing for Rod (commonly called insert). Usually Insert pumps are the first choice because they can be serviced simply by pulling the sucker rod string. Insertable pumps can be removed from the well without having to remove the production tubing.

The raw material of rod pump parts should be inspected after heat treatment, the mechanical properties, chemical compositions and metallographic structures must be inspected by batch. The rod pump parts should be inspected several times during the processing procedure. Some key points like the outer diameter of the plunger and the inner diameter of the pump barrel should be 100% inspected.